How do I apply Home Collection Coatings?
spotLESS Toilet Coating Application:
1. Remove the excess water in the toilet bowl.
2. Clean the toilet surface thoroughly with a toilet cleaner or rubbing alcohol. Wait until the surface is completely dried before the coating application.
3. Spray our spotLESS Toilet Coating onto the toilet surface. Roughly 10 - 15 squeezes would give all you need to cover the toilet surface. Alternatively, you can also spray the coating onto a paper towel and wipe the toilet surface uniformly. Wait for 5 minutes to cure, and you are done! Make sure you do it in a well ventilated environment, wear masks as necessary and wash your hands afterwards!
Sink & Fixture Coating Application:
1. Clean the sink or fixture surface thoroughly with a regular cleaner or rubbing alcohol. Wait until the surface is completely dried before the coating application.
2. Spray our spotLESS Sink & Fixture coating onto the sink or fixture surface uniformly. Alternative, you can also spray the coating onto a paper towel and wipe the sink or fixture surfaces uniformly. Wait for 5 minutes to cure, and you are done! Make sure you do it in a well ventilated environment, wear masks as necessary and wash your hands afterwards!
Glass & Mirror Coating Application:
1. Clean the glass or mirror thoroughly with a regular cleaner or rubbing alcohol. Wait until the surface is completely dried before the coating application.
2. Spray the Glass & Mirror Coating onto the mirror surface uniformly. Depending on the surface area of the mirror, roughly 5 - 10 squeezes would give all you need. Alternatively, you can also spray the coating onto a paper towel and wipe the mirror surface uniformly. Wait for 5 minutes to cure, remove haze with rubbing alcohol, and you are done! Make sure you do it in a well ventilated environment, wear masks as necessary and wash your hands afterwards!