Good product
I think it's a great product :)
Effectiveness |
Rated 4 out of 5
|
---|---|
Value |
Rated 5 out of 5
|
Ease of Use |
Rated 5 out of 5
|
spotLESS coating products are free of PFAs, phthalates, parabens, ammonia, and bleach.
For a complete list of ingredients and safety information, please refer to our Safety Data Sheets
When the coating is applied, it instantly forms a liquid infused nano-brush, acting as a tiny sponge that retains liquid lubricant.
The super-slippery layer prevents and reduces liquid, mineral deposits, or sticky solids from adhering, making an easy- clean surface.
As lubricant layer degrades with flushing, use Maintenance Spray to replenish the coating to its original slipperiness!
spotLESS coatings can reduce the amount of water needed to flush by up to 50%
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
With over half the planet experiencing water scarcity, we hope to scale spotLESS technology to help those struggling with inadequate sanitation due to water scarcity.
1. Remove all water from bowl by turning off water and flushing.
2. Thoroughly clean surface. For best results, use hard water stain remover.
3. Fully dry surface with cloth/paper towel.
4. Spray and wipe 10-15 pumps of coating to evenly cover surface.
5. Wait 5 minutes for coating to cure then use as normal.
spotLESS Home Collection coatings can be applied to glass, ceramic, porcelain, vitreous china surfaces. However, these coatings are not applicable to pre-coated surfaces, which may include some toilets. If you are unsure if your toilet is pre-coated, please reach out to our team at info@spotlessmaterials.com.
Yes! spotLESS coatings are compatible with regular cleaners including multi-purpose surface cleaning, bleach, hydrogen peroxide-based cleaner, mild acid cleaner, and alcohol-based cleaner. We recommend using a soft cloth or a soft-bristled plastic brush to clean your surface. We do not recommend using metal scrub brushes or steel wool in cleaning the surface. We also do not recommend using polishing powders or cleansers that contain coarse particles.
Depending on the frequency of usage, we recommend you to renew the surface with our Toilet Coating once a month to once every three months. The Maintenance Spray can be applied without emptying the bowl, and should be applied at least once a week for optimal performance.
We recommend you to clean your surface using a soft-bristled plastic brush at least once a week to remove the microscopic organic residues that are adhering onto the coated surface, followed by a few squeeze of the Maintenance Spray and apply it uniformly across the coated surface with a soft-bristled plastic brush. Your surface should be renewed instantly after the cleaning step.
Please note, if applying Maintenance Spray to the toilet, the bowl does not need to be emptied or dried prior to application. Just dispense a few squeezes and distribute around with a toilet brush.
Yes! Our spotLESS coatings do not contain PFAS. Protecting the environment by reducing the use of aggressive chemicals and reducing our water footprint are among our key motivations for developing our spotLESS coating products. The main active ingredient in our coating products is silicone, which is known in the scientific literature to degrade naturally into silica, water, and carbon dioxide without negative impact on the environment. Silicone is also commonly found in toothpaste and cosmetic products.
Reference: Graiver, D., Farminer, K. & Narayan, R. A review of the fate and effects of silicones in the environment. J. Polym. Environ. 11, 129–136 (2003).
Our spotLESS Toilet Coating, when fully applied onto a toilet surface, does not contain chemical components at a concentration level that are known to have a negative impact to the septic tank.
One coating application (typically 2-3 mL, or 15-20 pumps) can coat approximately 1 square foot of surface. Each bottle contains 30 mL.
1. Remove all water from bowl by turning off water and flushing.
2. Thoroughly clean surface. For best results, use hard water stain remover.
3. Fully dry surface with cloth/paper towel.
4. Spray and wipe 10-15 pumps of coating to evenly cover surface.
5. Wait 5 minutes for coating to cure then use as normal.
spotLESS Home Collection coatings can be applied to glass, ceramic, porcelain, vitreous china surfaces.
Yes! spotLESS coatings are compatible with regular cleaners including multi-purpose surface cleaning, bleach, hydrogen peroxide-based cleaner, mild acid cleaner, and alcohol-based cleaner. We recommend using a soft cloth or a soft-bristled plastic brush to clean your surface. We do not recommend using metal scrub brushes or steel wool in cleaning the surface. We also do not recommend using polishing powders or cleansers that contain coarse particles.
Depending on the frequency of usage, we recommend you to renew the surface with our Toilet Coating once a month to once every three months. The Maintenance Spray can be applied without emptying the bowl, and should be applied at least once a week for optimal performance.
We recommend you to clean your surface using a soft-bristled plastic brush at least once a week to remove the microscopic organic residues that are adhering onto the coated surface, followed by a few squeeze of the Maintenance Spray and apply it uniformly across the coated surface with a soft-bristled plastic brush. Your surface should be renewed instantly after the cleaning step.
Please note, if applying Maintenance Spray to the toilet, the bowl does not need to be emptied or dried prior to application. Just dispense a few squeezes and distribute around with a toilet brush.
Yes! Our spotLESS coatings do not contain PFAS. Protecting the environment by reducing the use of aggressive chemicals and reducing our water footprint are among our key motivations for developing our spotLESS coating products. The main active ingredient in our coating products is silicone, which is known in the scientific literature to degrade naturally into silica, water, and carbon dioxide without negative impact on the environment. Silicone is also commonly found in toothpaste and cosmetic products.
Our spotLESS Toilet Coating, when fully applied onto a toilet surface, does not contain chemical components at a concentration level that are known to have a negative impact to the septic tank.
One coating application (typically 2-3 mL, or 15-20 pumps) can coat approximately 1 square foot of surface. Each bottle contains 30 mL.
Effectiveness |
Rated 4 out of 5
Poor
Excellent
|
Value |
Rated 4 out of 5
Poor
Excellent
|
Ease of Use |
Rated 4 out of 5
Poor
Excellent
|
I think it's a great product :)
Effectiveness |
Rated 4 out of 5
Poor
Excellent
|
---|---|
Value |
Rated 5 out of 5
Poor
Excellent
|
Ease of Use |
Rated 5 out of 5
Poor
Excellent
|
The coating did perform as described.
Effectiveness |
Rated 5 out of 5
Poor
Excellent
|
---|---|
Value |
Rated 5 out of 5
Poor
Excellent
|
Ease of Use |
Rated 5 out of 5
Poor
Excellent
|
I had some second thoughts about spending $20 on a toilet coating product, but it actually works! Totally worth it to not have to clean the toilet as much- that’s one chore off the list!
Effectiveness |
Rated 5 out of 5
Poor
Excellent
|
---|---|
Value |
Rated 5 out of 5
Poor
Excellent
|
Ease of Use |
Rated 5 out of 5
Poor
Excellent
|
Say a bit about your brand, a specific product, or promotion.