FAQs
Home Collection
Toilet Coatings
Our Toilet Coating (1 oz package) allows you to coat ~5 to 6 individual toilets. The Maintenance Spray can be used to renew the surface for at least 10 - 15 times.
Our Toilet Coating is compatible to all types of toilets and urinals that are made out of ceramic without any pre-existing coatings on them.
You can apply our spotLESS Toilet Coating in three simple steps:
- Remove the excess water in the toilet bowl.
- Clean the toilet surface thoroughly with a toilet cleaner or rubbing alcohol. Wait until the surface is completely dried before the coating application.
- Spray our spotLESS Toilet Coating onto the toilet surface. Roughly 10 - 15 squeezes would give all you need to cover the toilet surface. Alternatively, you can also spray the coating onto a paper towel and wipe the toilet surface uniformly. Wait for 5 minutes to cure, and you are done! Make sure you do it in a well ventilated environment, wear masks as necessary and wash your hands afterwards!
- For step-by-step instructions, please refer to our instruction video.
Yes, our Toilet Coating is compatible with regular toilet cleaners including multi-purpose surface cleaning, bleach, hydrogen peroxide-based cleaner, mild acid cleaner, and alcohol-based cleaner. We recommend using a soft cloth or a soft-bristled plastic brush to clean your toilet bowl. We do not recommend using metal scrub brushes or steel wool in cleaning the surface. We also do not recommend using polishing powders or cleansers that contain coarse particles.
We recommend you to clean your toilet bowl using a soft-bristled plastic brush at least once a week to remove the microscopic organic residues that are adhering onto the coated surface, followed by a few squeeze of the Maintenance Spray and apply it uniformly across the coated surface with a soft-bristled plastic brush. Your surface should be renewed instantly after the cleaning step.
Depending on your frequency of usage, we recommend you to renew the surface with our Toilet Coating once a month.
Depending on your frequency of usage, we recommend you to renew the surface with our Maintenance Spray once a week for home use, or once every two days for high frequency toilet usage in commercial settings or public bathrooms.
No. Our Maintenance Spray by itself has little self-cleaning effect. This spray is only compatible with spotLESS Home Collection Coatings.
Our spotLESS Toilet Coating can effectively prevent hard water stains build-up by >95% compared to other untreated surfaces.
Our spotLESS Toilet Coating, when fully applied onto a toilet surface, does not contain chemical components at a concentration level that are known to have a negative impact to the septic tank.
Our spotLESS Toilet Coating does not contain PFAS. Protecting the environment by reducing the use of aggressive chemicals and reducing our water footprint are among our key motivations for developing our spotLESS coating products. The main active ingredient in our coating products is silicone, which is known in the scientific literature to degrade naturally into silica, water, and carbon dioxide without negative impact on the environment. Silicone is also commonly found in toothpaste and cosmetic products.
Reference: Graiver, D., Farminer, K. & Narayan, R. A review of the fate and effects of silicones in the environment. J. Polym. Environ. 11, 129–136 (2003).
Sink & Fixture Coating
You can cover roughly 1 sq. ft (~930 sq. cm) of surface area using ~2 – 3 mL of our coating solutions. That is 15 – 20 squeezes from the bottle.
Our Sink & Fixture coating is compatible with ceramic, porcelain, and glass.
You can apply our spotLESS Sink & Fixture coating in two simple steps:
- Clean the sink or fixture surface thoroughly with a regular cleaner or rubbing alcohol. Wait until the surface is completely dried before the coating application.
- Spray our spotLESS Sink & Fixture coating onto the sink or fixture surface uniformly. Alternative, you can also spray the coating onto a paper towel and wipe the sink or fixture surfaces uniformly. Wait for 5 minutes to cure, and you are done! Make sure you do it in a well ventilated environment, wear masks as necessary and wash your hands afterwards!
- For step-by-step instructions, please refer to our instruction video .
Yes, our Sink & Fixture Coating is compatible with regular cleaners including multi-purpose surface cleaning, bleach, hydrogen peroxide-based cleaner, mild acid cleaner, and alcohol-based cleaner. We recommend using a soft cloth to clean your sink surface. We do not recommend using polishing powders or cleansers that contain coarse particles. We also do not recommend using metal scrub brushes or steel wool in cleaning the surface.
Depending on your frequency of usage, we recommend you to renew the surface with our Sink & Fixture Coating once a month.
We recommend you to clean your sink using a soft cloth at least once a week or every two weeks to remove the microscopic organic residues that are adhering onto the coated surface, followed by a few squeeze of the Maintenance Spray and apply it uniformly across the coated surface with a soft cloth. Your surface should be renewed instantly after the cleaning step.
Depending on your frequency of usage, we recommend you to renew the surface with our Maintenance Spray once a week for home use, or once every two days for high frequency usage in commercial settings or public bathrooms.
No. Our Maintenance Spray by itself has little self-cleaning effect. This spray is only compatible with spotLESS Home Collection Coatings.
Our spotLESS Sink & Fixture Coating does not contain PFAS. Protecting the environment by reducing the use of aggressive chemicals and reducing our water footprint are among our key motivations for developing our spotLESS coating products. The main active ingredient in our coating products is silicone, which is known in the scientific literature to degrade naturally into silica, water, and carbon dioxide without negative impact on the environment. Silicone is also commonly found in toothpaste and cosmetic products.
Reference: Graiver, D., Farminer, K. & Narayan, R. A review of the fate and effects of silicones in the environment. J. Polym. Environ. 11, 129–136 (2003).
Glass & Mirror Coating
You can cover roughly 1 sq. ft (~930 sq. cm) of surface area using ~2 – 3 mL of our coating solutions. That is 15 – 20 squeezes from the bottle.
You can apply our spotLESS Glass & Mirror coating in two simple steps:
- Clean the glass or mirror thoroughly with a regular cleaner or rubbing alcohol. Wait until the surface is completely dried before the coating application.
- Spray the Glass & Mirror Coating onto the mirror surface uniformly. Depending on the surface area of the mirror, roughly 5 - 10 squeezes would give all you need. Alternatively, you can also spray the coating onto a paper towel and wipe the mirror surface uniformly. Wait for 5 minutes to cure, remove haze with rubbing alcohol, and you are done! Make sure you do it in a well ventilated environment, wear masks as necessary and wash your hands afterwards!
- For step-by-step instructions, please refer to our instruction video.
Depending on your frequency of usage, we recommend you to renew the surface with our Maintenance Spray once a week.
No. Our Maintenance Spray by itself has little self-cleaning effect. This spray is only compatible with spotLESS Home Collection Coatings.
Our spotLESS Glass & Mirror Coating does not contain PFAS. Protecting the environment by reducing the use of aggressive chemicals and reducing our water footprint are among our key motivations for developing our spotLESS coating products. The main active ingredient in our coating products is silicone, which is known in the scientific literature to degrade naturally into silica, water, and carbon dioxide without negative impact on the environment. Silicone is also commonly found in toothpaste and cosmetic products.
Reference: Graiver, D., Farminer, K. & Narayan, R. A review of the fate and effects of silicones in the environment. J. Polym. Environ. 11, 129–136 (2003).
Automotive Collection
The spotLESS Windshield Treatment is 2X as slippery as Rain-X, making it the optimal choice for repelling all sorts of unwanted material from your windshield. The Windshield Treatment can also be applied more quickly than its competitors. The treatment also possesses superior mechanical durability and long-lasting hydrophobic effects than competitors.
The Windshield Treatment is highly durable and does not degrade under direct sunlight for at least 2.5 years. Depending on the usage of the windshield wiper, we recommend to re-apply the Windshield Treatment at least once every 3 - 6 months.
Yes! The spotLESS Windshield Treatment is compatible with any regular cleaning that your car may undergo.
No. Our Windshield Treatment Kit is specifically designed to bond to the glass material in windshields. Our current formulation does not provide repellency for painted parts of the car. Stay tuned for new products!
You can cover roughly 1 sq. ft (~930 sq. cm) of surface area using ~2 mL of our coating solutions. The 1 oz bottle can cover roughly a total surface area equivalent to ~2 windshields of a standard sedan or SUV. A little bit of our highly concentrated solution goes a long way!
You can apply our spotLESS Windshield Treatment in the following steps:
1. Clean the windshield thoroughly with a regular glass cleaner, followed by rubbing alcohol. Wait until the surface is completely dried before the coating application.
2. Spray our spotLESS Windshield Treatment onto the windshield surface uniformly. Roughly 10 squeezes would give all you need. Alternatively, you can also spray the coating onto a paper towel and wipe the windshield uniformly. Wait for 5 minutes to cure, and remove haze using rubbing alcohol, and then you are done! Make sure you do it in a well ventilated environment, wear mask as necessary and wash your hand afterwards!
For step-by-step instructions, please refer to our instruction video.